Supply · Jordan
Power Transformers in Jordan
1 – 20 MVA. Manufactured in India to IS and IEC standards and shipped to Jordan: Ex Factory or FOB Mundra / Nhava Sheva; CFR Aqaba on request.
Power transformer under assembly
Logistics and network
Shipping to Jordan.
Consignments for Jordan move Sea from Mundra or Nhava Sheva to Aqaba, then road to Amman (about 330 km). Typical transit is 8 to 12 days; discharge at Aqaba. We quote Ex Factory or FOB Mundra / Nhava Sheva; CFR Aqaba on request, with payment by LC at sight or advance, USD.
The grid runs at 50 Hz with 400/230 V low-voltage supply and 11 kV and 33 kV distribution (JEPCO: 33 kV, 11 kV and 415 V); 132 kV and 400 kV transmission. Distribution is operated by NEPCO for transmission; JEPCO (central), IDECO (north) and EDCO (south and east) for distribution, regulated by Energy and Minerals Regulatory Commission (EMRC). Import conformity: Jordan Standards and Metrology Organization (JSMO) technical regulations and utility type approval; IEC designs.
The power transformer line closed the last gap in the chain. Between distribution and power class we now cover 16 kVA right through to 20 MVA — a span very few regional manufacturers hold on a single site.
The standard substation build is 33/11 kV, Dyn11, ONAN, with an off-circuit tap changer at +5% to −10%. Where the network needs voltage regulation under load we fit an on-load tap changer at +5% to −15%, and where the load profile justifies forced cooling we supply ONAF with a rated output at each cooling stage.
| Parameter | Specification |
|---|---|
| Rated power | 1 MVA to 20 MVA |
| Typical ratings | 1 · 1.6 · 2 · 2.5 · 3.15 · 5 · 6.3 · 8 · 10 · 12.5 · 16 · 20 MVA |
| Voltage class | 33 / 11 kV; highest system voltage 36 kV |
| Phases | Three-phase |
| Type | Oil-immersed, outdoor, core type — plain or corrugated tank; dry type to order |
| Frequency | 50 Hz standard; 60 Hz for export |
Specifying
What changes for Jordan.
- Climate and site: Desert and semi-arid, 45 °C with dust; Amman at 800 to 1,000 m.
- Built to IEC 60076 for 50 Hz, with insulation levels for the 11 kV and 33 kV distribution (JEPCO: 33 kV, 11 kV and 415 V) and 400/230 V secondaries; temperature-rise limits and cooling sized for the stated ambient and altitude.
- Fittings, bushings and tap-changer ranges follow the utility specification (NEPCO for transmission; JEPCO (central), IDECO (north) and EDCO (south and east) for distribution); type-test certificates from CPRI or ERDA accompany the offer.
- Documentation: commercial invoice, packing list, certificate of origin, test certificates and the import conformity certificate where Jordan requires one.
Questions
Frequently asked.
How long does delivery of Power Transformers to Jordan take?
What documents and certificates come with a consignment to Jordan?
Which standard and voltage class do you build to for Jordan?
Send us your Power Transformers schedule for Jordan.
Ratings, quantities, the specification you are buying against and the delivery point. We return a quotation with a firm delivery programme.