Supply · Maharashtra
Power Transformers in Maharashtra
1 – 20 MVA. Delivery across Maharashtra about 5 days by road, built to the specification your utility or project issues.
Power transformer under assembly
Logistics and network
Supplying Maharashtra.
Deliveries across Maharashtra start at about 1080 km by road, which puts the nearer cities (Jalgaon, Amravati, Dhule) within 5 days of dispatch. The state's demand centres on Mumbai and Navi Mumbai, JNPT (Nhava Sheva) port, Pune auto and engineering, Nashik and Aurangabad engineering, Nagpur MIHAN, Solapur and Dhule solar, Kolhapur foundries.
Distribution in Maharashtra is handled by MSEDCL, with Adani Electricity, Tata Power and BEST in Mumbai; MSETCL runs the transmission network. Programmes now in execution include RDSS, MSEDCL agricultural feeder solarisation (MSKVY 2.0), and each is tendered against a technical specification that we quote and manufacture to.
The power transformer line closed the last gap in the chain. Between distribution and power class we now cover 16 kVA right through to 20 MVA — a span very few regional manufacturers hold on a single site.
The standard substation build is 33/11 kV, Dyn11, ONAN, with an off-circuit tap changer at +5% to −10%. Where the network needs voltage regulation under load we fit an on-load tap changer at +5% to −15%, and where the load profile justifies forced cooling we supply ONAF with a rated output at each cooling stage.
| Parameter | Specification |
|---|---|
| Rated power | 1 MVA to 20 MVA |
| Typical ratings | 1 · 1.6 · 2 · 2.5 · 3.15 · 5 · 6.3 · 8 · 10 · 12.5 · 16 · 20 MVA |
| Voltage class | 33 / 11 kV; highest system voltage 36 kV |
| Phases | Three-phase |
| Type | Oil-immersed, outdoor, core type — plain or corrugated tank; dry type to order |
| Frequency | 50 Hz standard; 60 Hz for export |
Specifying
What changes for Maharashtra.
- Design ambient 50 °C; seismic classification Zone IV (Koyna belt) for structures and foundations.
- Coastal and industrial exposure: C5-M grade exterior paint, stainless or hot-dip galvanized hardware and heavier zinc coating on steel parts for sites near the coast.
- Temperature rise 45 K winding and 40 K top oil over the stated ambient, or 55 K / 50 K where MSEDCL specifications allow; losses, impedance and tapping to the utility schedule or IS 1180 level.
Questions
Frequently asked.
How long does delivery of Power Transformers to Maharashtra take?
Can you build to the MSEDCL specification?
Do you supply private buyers and contractors across Maharashtra, not only utilities?
Send us your Power Transformers schedule for Maharashtra.
Ratings, quantities, the specification you are buying against and the delivery point. We return a quotation with a firm delivery programme.