Supply · Uganda
Servo Voltage Stabilizers in Uganda
1 kVA – 5000 kVA. Manufactured in India to IS and IEC standards and shipped to Uganda: Ex Factory or FOB Mundra / Nhava Sheva; CIF Mombasa on request.
Core-and-coil assembly bay
Logistics and network
Shipping to Uganda.
Consignments for Uganda move Sea to Mombasa, then road on the Northern Corridor to Kampala, about 1,100 km. Typical transit is 10 to 14 days to Mombasa, 5 to 8 days road; discharge at Mombasa (Kenya), then road. We quote Ex Factory or FOB Mundra / Nhava Sheva; CIF Mombasa on request, with payment by LC at sight or advance, USD.
The grid runs at 50 Hz with 415/240 V low-voltage supply and 11 kV and 33 kV distribution; 132 kV transmission. Distribution is operated by Uganda Electricity Distribution Company (UEDCL, which took over the Umeme concession in 2025) and UETCL for transmission, regulated by Electricity Regulatory Authority (ERA). Import conformity: UNBS Pre-Export Verification of Conformity (PVoC): Certificate of Conformity issued in the country of export for consignments above USD 2,000 FOB.
A servo stabilizer holds the output voltage steady by continuously varying a motorised variac, rather than switching between fixed taps. That gives smooth correction with no waveform distortion and no switching transient — which matters when the load is a CNC machine, a medical imaging system or a process line rather than a lighting circuit.
Three-phase units are built as single-variac (all phases corrected together) or three-variac (each phase independently). Specify three-variac where the incoming supply is unbalanced, as most Indian industrial feeders are.
| Parameter | Specification |
|---|---|
| Rated capacity | 1 kVA to 25 kVA single phase; 10 kVA to 5000 kVA three phase |
| Cooling | Air natural (AN) on smaller ratings; oil natural (ONAN) on larger |
| Frequency | 50 / 60 Hz ± 5% |
| Applicable standards | IS 9815, IS 2026 for the internal transformer, IS 335 for oil |
Specifying
What changes for Uganda.
- Climate and site: Equatorial highland, 1,100 to 1,300 m altitude, 30 °C; altitude derating applies.
- Built to IEC 60076 for 50 Hz, with insulation levels for the 11 kV and 33 kV distribution and 415/240 V secondaries; temperature-rise limits and cooling sized for the stated ambient and altitude.
- Fittings, bushings and tap-changer ranges follow the utility specification (Uganda Electricity Distribution Company (UEDCL, which took over the Umeme concession in 2025) and UETCL for transmission); type-test certificates from CPRI or ERDA accompany the offer.
- Documentation: commercial invoice, packing list, certificate of origin, test certificates and the import conformity certificate where Uganda requires one.
Questions
Frequently asked.
How long does delivery of Servo Voltage Stabilizers to Uganda take?
What documents and certificates come with a consignment to Uganda?
Which standard and voltage class do you build to for Uganda?
Send us your Servo Voltage Stabilizers schedule for Uganda.
Ratings, quantities, the specification you are buying against and the delivery point. We return a quotation with a firm delivery programme.