Supply · Uttar Pradesh
HDPE Pressure Pipes in Uttar Pradesh
PE 63 / 80 / 100. Delivery across Uttar Pradesh about 2 days by road, built to the specification your utility or project issues.
HDPE pipe extrusion line
Logistics and network
Supplying Uttar Pradesh.
Deliveries across Uttar Pradesh start at about 160 km by road, which puts the nearer cities (Noida, Ghaziabad, Meerut) within 2 days of dispatch. The state's demand centres on Noida and Greater Noida electronics, Ghaziabad and Meerut engineering, Kanpur leather and defence, Lucknow, Agra and Aligarh metalware, Moradabad brass, Varanasi, Gorakhpur GIDA, Bundelkhand solar.
Distribution in Uttar Pradesh is handled by PVVNL, MVVNL, PuVVNL, DVVNL and KESCO; UPPTCL runs the transmission network. Programmes now in execution include RDSS, UP solar policy and Bundelkhand parks, UPPTCL 132 kV expansion, and each is tendered against a technical specification that we quote and manufacture to.
HDPE extended the same extrusion discipline we had built for cable into water infrastructure. The appeal is simple: it does not corrode, it does not scale, and jointed correctly it stays leak-free for decades. For buried irrigation networks that matters far more than initial cost.
The grade decision is the one worth understanding. For the same pressure class, a higher PE grade needs a thinner wall — at OD 110 and PN 10, PE 63 needs 12.3 mm, PE 80 needs 10.0 mm and PE 100 needs 8.1 mm. That is roughly a third less material for the same duty, which changes both the price and the handling weight.
| Parameter | Specification |
|---|---|
| Product | HDPE pressure pipe for water supply and irrigation |
| Standard | IS 4984 |
| Material grades | PE 63, PE 80, PE 100 |
| Pressure classes | PN 2 to PN 20 depending on grade |
| Outside diameter range | 20 mm to 630 mm |
| Extrusion rate | 300 kg per hour |
Specifying
What changes for Uttar Pradesh.
- Design ambient 50 °C; seismic classification Zone IV for structures and foundations.
- Inland exposure: standard epoxy-polyurethane exterior finish and hot-dip galvanized steel parts.
- PE 80 and PE 100 pipe in PN 4 to PN 16, UV-stabilised for open storage at the stated ambient; coils and straight lengths to the laying plan.
Questions
Frequently asked.
How long does delivery of HDPE Pressure Pipes to Uttar Pradesh take?
Can you build to the PVVNL specification?
Do you supply private buyers and contractors across Uttar Pradesh, not only utilities?
Send us your HDPE Pressure Pipes schedule for Uttar Pradesh.
Ratings, quantities, the specification you are buying against and the delivery point. We return a quotation with a firm delivery programme.